Best Bidirectional Scan Tools
Top pick: XTOOL A30M for active tests and resets with no subscription
Buy the XTOOL A30M if you want one bidirectional scan tool that runs active tests and service resets on most cars and light trucks for years without paying for updates. It is a Bluetooth dongle that plugs into the OBD2 port and runs from an iOS or Android phone. XTOOL’s manual warns: run the engine only in a well-ventilated area, because carbon monoxide can cause serious injury or death; wear eye protection that meets ANSI standards; put the transmission in PARK or NEUTRAL, set the parking brake, block the drive wheels and never leave the vehicle unattended while testing; do not connect or disconnect the tool while the ignition is on or the engine is running; and do not drive the vehicle while operating the tool.
Get XTOOL A30MIt wins on three published figures. First, service functions: XTOOL’s page for the A30M lists 26+ resets and services for the 2.0 version. Among them are oil reset, EPB, steering angle (SAS), DPF regeneration, BMS reset, ABS bleeding, injector coding, throttle relearn, crank sensor relearn, TPMS, gearbox match and headlight adjustment. Second, ownership cost: XTOOL includes lifetime free software updates. Third, warranty: XTOOL’s warranty policy covers the host and VCI for 24 months from activation, and the charger, VCI box, battery and other accessories for 12 months. XTOOL’s own price for the base A30M V2.0 is $132.99.
Make sure the unit is the 2.0. XTOOL says the 2.0 version adds the FCA protocol (AutoAuth access on 2018+ Chrysler, Jeep, Dodge and Fiat) and CAN FD for GM vehicles built after 2020. An original A30M without those is the wrong tool for a 2021 Silverado or a 2019 Ram. The app graphs up to 8 live data streams at once, enough to watch fuel trims, O2 sensors and MAF together while you command a component.
Who should not buy it: a shop that needs ECU coding, topology mapping or J2534 reflashing should look at the TOPDON ONE further down. A mechanic who will not diagnose on a phone should look at the Innova 5610 or the TOPDON AD900 Lite, which both have their own screens.
Get Innova 5610 Get TOPDON AD900 Lite Get TOPDON ONEHow these scan tools were ranked
These picks were not tested; this is what the makers’ specifications show. Each tool was judged on six criteria, roughly in this order of weight:
- Bidirectional depth. Can it command components (fuel pump, injectors, cooling fan, A/C clutch, EPB motor) and run routines? Or does it only read codes and live data? Every tool here does both, but the number of named service functions ranges from 8 (TOPDON AD900 Lite, TOPDON TopScan Lite) to 50+ (TOPDON ONE).
- Update cost over three years. XTOOL, GEARWRENCH, Innova and TOPDON’s AD900 Lite publish free updates for life. The TopScan Lite costs $49 a year after year one, and the TOPDON ONE costs $299 a year, per TOPDON. That difference outweighs a $50 gap in purchase price.
- Warranty length and terms. XTOOL and GEARWRENCH publish 2 years. Innova and TOPDON publish 1 year, and on the TOPDON ONE the warranty only continues while the update subscription is active.
- Network access on newer vehicles. CAN FD (GM 2020+), DoIP (used by BMW, Mercedes, Volvo and Jaguar Land Rover) and the FCA Secure Gateway (2018+ Stellantis) decide whether a tool can command anything at all on those vehicles.
- Form factor. A phone dongle (A30M, GWSMARTBT, TopScan Lite) costs least and fits a glovebox. A handheld (Innova 5610) needs no phone. A tablet (AD900 Lite, ONE) gives an 8-inch or 10.1-inch screen for graphing.
- Operating temperature. Many winter garages run below freezing. GEARWRENCH rates the GWSMARTBT at 32-104°F. TOPDON rates the TopScan Lite and the TOPDON ONE’s VCI at 14-122°F.
This list gives no scores. The order reflects which tool covers the widest set of jobs for the buyer each section names.
GEARWRENCH GWSMARTBT vs XTOOL A30M: the close call
The GEARWRENCH GWSMARTBT is the A30M’s nearest rival, and the gap is narrow. GEARWRENCH’s page for the GWSMARTBT lists full bidirectional control with live actuation testing and 23 reset and relearn functions. Those include throttle relearn, ABS bleeding, TPMS, BMS, DPF, EPB, injector coding, gearbox match, suspension relearn, seat calibration and transport mode. GEARWRENCH also lists coverage of 185+ car manufacturers, AUTOAUTH readiness for FCA secure gateway access, free updates with “no subscriptions, no fees – ever”, and a 2-year warranty.
The A30M wins for most buyers. It lists 26+ functions against 23, names crank sensor relearn, which GEARWRENCH’s function list does not, and graphs up to 8 live data streams, and XTOOL’s own price is lower. Both makers state a make count: GEARWRENCH lists 185+ car manufacturers, and XTOOL lists 85+ American, European, and Asian makes. Both carry 2-year warranties, so warranty does not separate them.
The GWSMARTBT is small: GEARWRENCH lists it at 3.4 x 2.1 x 0.9 in and 0.243 lb, with a 9-32 VDC input and a storage range of -40 to 140°F. GEARWRENCH lists a California Prop 65 warning: the product contains or produces a chemical known to cause cancer and birth defects or other reproductive harm. Its weak spot is temperature. GEARWRENCH rates it to operate at 32-104°F only, so a tool left in an unheated truck box in January is outside its rating until it warms up.
Buy the GWSMARTBT instead of the A30M if it is the cheaper of the two on the day, if your vehicles are on GEARWRENCH’s published make list, or if you want the larger stated make count (185+ against XTOOL’s 85+). Do not buy it for unheated winter work without a warm cab to start it in.
Innova 5610: the handheld for buyers who want no phone in the loop
The Innova 5610 is the name many buyers start with, and it suits a different person from the A30M: someone who wants a self-contained handheld with its own screen and buttons. According to Innova’s manual, it is powered through the vehicle’s DLC connector when plugged in, and it also takes three AA batteries, which Innova says to replace when the low-battery icon shows.
Innova’s page for the 5610 lists bidirectional commands to components such as ABS pumps or fuel injectors (its manual adds fuel pump and ignition coils) and an Electronic Parking Brake Reset. It reads and clears engine, ABS and SRS codes, includes free updates, and comes with a 1-year warranty. The Service Reset menu in Innova’s manual covers oil maintenance, battery, EPB, steering angle, DPF and ABS bleeding, and Innova’s page lists more, including TPMS relearn, throttle body relearn and injector coding. One limit is in the manual: the battery reset OBD service runs only on Audi, Volkswagen, BMW, Ford and Volvo. On other makes the tool shows the battery reset procedure as steps for you to follow by hand. Innova’s manual warns: turn the ignition OFF before connecting the scan tool to, or disconnecting it from, the vehicle’s DLC; operate the vehicle ONLY in a well-ventilated area, because of carbon monoxide; always wear approved safety eye protection; engage the parking brake, put the transmission in park or neutral and block the drive wheels before starting the engine; and do not smoke near the vehicle during testing. Innova says the vehicle must be able to start or crank for the tool to connect, and it lists a California Prop 65 warning (DinP, cancer). Innova’s own price runs about $350-380.
Against the A30M, you gain a dedicated screen, no Bluetooth pairing, no phone battery to watch, and US-based support that Innova advertises. Innova’s manual lists a Cam Crank Relearn only among its Chrysler system tests, and Innova’s page names injector coding among the 35 functions on its Advanced Resets list. The warranty is half as long (1 year against 2). And the price is more than twice XTOOL’s own price for the A30M. Buy the 5610 if a phone in the engine bay is a deal-breaker. Otherwise the A30M costs less and carries the longer warranty.
TOPDON AD900 Lite and TOPDON ONE: when a tablet is worth it
The TOPDON AD900 Lite is the pick for a home or light-duty mechanic who wants a real screen without a subscription. TOPDON’s page for the ArtiDiag900 Lite lists free lifetime updates. Warranty is 1 year. TOPDON lists a California Prop 65 warning: cancer and reproductive harm. The tablet has an 8-inch touchscreen running Android 11, a 10,000mAh battery and a magnetic Bluetooth VCI, so you can sit in the driver’s seat while the VCI stays on the port. It runs bidirectional active tests on components like fuel injectors, coolant pumps, windows and windshield wipers, and lists 8 resets: oil, throttle adaptation, EPB, steering angle, DPF regeneration, ABS bleeding, BMS and airbag. That is fewer services than the A30M, and no injector coding. Buy it for the screen and battery life, not for coverage.
The TOPDON ONE is the pick here built for a working shop. TOPDON’s page for the ONE lists a 10.1-inch 1280 × 800 display, an 8-core processor, 4 GB RAM, 128 GB storage, a 10,000mAh battery and Android 12. Its VCI supports J2534 pass-thru, so it can reflash modules when paired with OEM software. TOPDON says a compatible laptop and active OEM software subscriptions are required, and DoIP system diagnostics are not supported when used with OEM software. It lists a California Prop 65 warning: cancer and reproductive harm. TOPDON also lists topology mapping of every module on the network, ECU coding for 10+ brands including BMW, Benz, VAG, Nissan and Toyota, 50+ services including ADAS calibration and injector coding, and CAN-FD, DoIP, FCA SGW, Nissan SGW and VAG SFD support.
The catch is the ownership terms. TOPDON includes 1 year of updates, then charges $299 for 1 year or $479 for 2. The 1-year warranty only continues with an active subscription, and topology mapping, ECU coding and gateway access need that subscription. Buy the ONE if coding and reflashing bring in paid work. A home mechanic should not buy it: the yearly update fee alone is more than twice XTOOL’s price for an A30M.
Not worth the money: the TopScan Lite past year one
The TOPDON TopScan Lite looks like the cheapest way into bidirectional control. TOPDON lists 8 services (oil, throttle, EPB, steering, DPF, BMS, airbag and ABS bleeding), all-system scanning on 120+ brands, and CAN-FD. It is rated at 14-122°F, wider than the GWSMARTBT. TOPDON lists a California Prop 65 warning: cancer and reproductive harm. But TOPDON’s page for the TopScan Lite lists only 1 year of updates and a 1-year warranty, with renewal at $49 a year.
The renewal matters because of what stops without it. TOPDON’s sell sheet gives 1 year of free updates and says you “always have the power to read full-system fault codes”; it lists no TopFix AI on the Lite. TOPDON does not list which other functions keep working without renewal. Over three years the renewals add $98, which wipes out its price advantage over the A30M, and the A30M lists more services and a 2-year warranty.
Buy the TopScan Lite only for a single job inside 12 months, such as one EPB service or one ABS bleed, and accept that it goes back in the drawer. For anything longer, the A30M or GWSMARTBT is the better buy.
What bidirectional control does, and where these tools fail
A code reader only listens. A bidirectional tool also sends requests to a module. In the UDS protocol (ISO 14229), service 0x2F (InputOutputControlByIdentifier) drives an output such as a fuel pump relay or cooling fan. Service 0x31 (RoutineControl) runs a procedure such as ABS bleeding, a DPF regeneration or a steering angle calibration. Generic OBD2 (SAE J1979) offers only mode $08, used on a few vehicles for an EVAP seal test. This is why bidirectional coverage depends on make and model, not on the OBD2 port: each automaker defines its own identifiers and routines, and the tool’s software has to know them.
Four failure modes come up repeatedly:
- Secure gateways. On 2018+ FCA vehicles, active tests and code clearing are blocked until the tool logs in through AutoAuth. AutoAuth is a separate account from the scan tool maker, so budget for it if you work on Jeep or Ram.
- CAN FD and DoIP. A tool without CAN FD can read little or nothing on many 2020+ GM vehicles, and DoIP decides access on newer BMW, Mercedes, Volvo and JLR. XTOOL documents CAN FD on the A30M 2.0, and TOPDON documents CAN-FD and DoIP on the ONE.
- Voltage during long routines. DPF regeneration, injector coding and BMS registration can run for minutes with the ignition on. A battery that sags mid-routine can abort it, so connect a battery maintainer first.
- ADAS calibration. The TOPDON ONE lists ADAS calibration, but static camera and radar calibration also needs the automaker’s targets and a level floor. The scan tool alone is not enough.
J2534 reflashing on the ONE has a similar dependency: the pass-thru VCI is hardware only. The automaker’s own software and subscription are bought separately from the automaker.
Related guides
- 21° vs 30° Framing Nailers: Match the Angle, Collation and Nails
- Best ATV/UTV Tool Boxes and Cargo Racks (2026): For Farm and Ranch Work
- Best Balaclavas and Neck Gaiters for Cold Work
- Best Bib Overalls for Construction and Cold-Weather Work (2026)
FAQ
Do I need a bidirectional scan tool, or will a code reader do?
A code reader tells you a code is set. A bidirectional tool lets you command the part to prove whether it or its wiring is at fault. Jobs like retracting an electric parking brake for rear pads, bleeding an ABS module or registering a new battery on a BMW need a tool that can run those routines. If you only clear check-engine lights, a code reader is enough. If you replace brakes, batteries or sensors on post-2010 vehicles, buy bidirectional.
Can these tools program keys or replace modules?
TOPDON lists optional key programming for the TopScan Lite on compatible vehicles, which requires NASTF VSP certification; the other phone dongles here do not list it. The XTOOL A30M and GEARWRENCH GWSMARTBT list injector coding, and TOPDON lists ECU coding for 10+ brands on the TOPDON ONE. Flashing a replacement module takes J2534 pass-thru, which on this list only the TOPDON ONE’s VCI supports, and it also needs the automaker’s own software bought from the automaker.
Will a Bluetooth scan tool work in a cold garage or truck?
Check the rating, because it varies. GEARWRENCH rates the GWSMARTBT at 32-104°F, so it is outside spec below freezing. TOPDON rates the TopScan Lite and the TOPDON ONE’s VCI at 14-122°F. The Innova 5610 needs no phone; Innova’s manual says it is powered through the vehicle’s DLC connector and also takes three AA batteries.