Best Paslode Fuel Cells and Nail Packs for Framing Nailers

The pack to buy: Paslode 650525, 3 in. x .131 smooth bright

For most people framing walls, floors and roofs with a Paslode cordless 30° framer, the Paslode Framing Nails & Fuel Pack 650525 is the one to buy. It holds 1,000 RounDrive nails, 3 in. x .131 in., smooth shank, bright finish, collated at 30° on paper strips, plus the exact number of fuel cells needed to fire all the nails in the pack. Paslode sizes every Fuel + Nail Pack so the cells in the box fire all the nails in the box. That makes the nail count a fuel gauge: when the last strip goes in, the cell is about done.

Get Paslode Framing Nails & Fuel Pack 650525

The pick was chosen on three things: whether the nail size covers the connections a framer makes most often, whether the fuel matches the nail count, and whether every current Paslode framer accepts it. The 3 in. x .131 in. nail does best on the first point. The IRC fastening schedule, Table R602.3(1), lists 3 in. x 0.131 in. nails as an option for many stud, plate and header connections, so one box covers most of a wall-framing day. Paslode’s Cordless XPro 30° Framing Nailer (CF325XPRO24, item 906800) drives 30° RounDrive nails from 2 in. to 3-1/4 in., so this nail sits mid-range and drives in the current tool and the earlier CFN325XP.

Who should not buy it: anyone nailing pressure-treated sill plates, exterior decking or anything left out in the weather. Paslode’s manual recommends its hot-dipped galvanized nails for preservative treated lumber. For that work, buy a hot-dipped galvanized ring-shank pack instead (see below). It also isn’t worth it for sheathing-only days, where a 2-3/8 in. nail does the job.

These picks were not tested. They rest on Paslode’s own product pages, operating manuals, its 2025 and 2026 full-line catalogs and its product bulletin on fuel adaptors.

Fuel + Nail Pack or the standalone 816008 framing fuel cell

Paslode’s Cordless Framing Fuel Cell, item 816008, is the tall orange cell sold on its own. Paslode rates it to drive up to 1,200 framing nails, says it works in temperatures down to 14°F, and its catalog gives a 27-month shelf life. Paslode says each Fuel + Nail Pack includes the exact number of fuel cells needed to fire all the nails in the pack. Paslode says the nails work like a fuel gauge: when you drive all the nails, it’s time for more fuel.

That difference decides who should buy which:

Paslode’s page for the 816008 lists Home Depot, Menards, Lowe’s and Nail Gun Depot as its online sellers, and the page links Paslode’s Where to Buy locator for local dealers.

Don’t buy more loose cells than you will use within the 27-month shelf life, and don’t stock up on packs for a job months away if the fuel will sit in a hot truck. Heat is covered below.

Choosing a pack by nail: length, shank and coating

All the packs below use 30° paper-tape RounDrive nails and Paslode’s framing fuel. Only the nail changes, and the nail decides the purchase.

Paslode Framing Nails & Fuel Pack 650522: 2-3/8 in. x .113 in., smooth shank, bright, 1,000 nails, plus the exact number of fuel cells needed to fire all the nails in the pack. This is the sheathing and light-framing size. Paslode’s XPro manual lists 2-3/8 in. x .113 in. nails for sheathing and decking. Don’t use it for stud-to-plate or header connections that your plans or the IRC table call out in 0.131 in. diameter, because a .113 in. shank is a smaller nail.

Get Paslode Framing Nails & Fuel Pack 650522

Paslode Framing Nails & Fuel Pack 650526: the same 2-3/8 in. x .113 in. size, but ring shank and hot-dipped galvanized, 1,000 nails, plus the exact number of fuel cells needed to fire all the nails in the pack. Paslode’s page for its hot-dipped galvanized RounDrive nails says the heads have a polymer coating that reduces staining and streaking compared with traditional hot-dipped galvanized nails. Between 650522 and 650526, the 650526 wins for exterior sheathing, siding backers and any surface that will show weather, because the rings resist pull-out and the zinc resists rust. The 650522 is for dry interior work.

Get Paslode Framing Nails & Fuel Pack 650526

Paslode 650535 Fuel and Nail Pack: 3-1/4 in. x .131 in., smooth, bright, 1,000 nails with fuel. This is the longest nail the XPro takes. Buy it when the plans call for 3-1/4 in. nails, or when you are nailing through doubled members and need the extra 1/4 in. of penetration. Don’t buy it as your everyday nail: most wall connections don’t need the extra length. Between 650535 and 650525, the 650525 wins for general framing and the 650535 is the specialist box.

Get Paslode 650535 Fuel and Nail Pack

Paslode also makes a hot-dipped galvanized ring-shank pack, item 650527, with 1,000 nails, 3 in. x .120 in., but its cordless framing nailer manual says the nailer is not recommended for use with 3 in. and longer ring shank nails in pressure treated lumber. Its 0.120 in. shank is thinner than the 0.131 in. in the 650525, so it isn’t a drop-in swap wherever the schedule calls for 0.131 in.

Which zinc coating treated lumber needs is set by the treater’s fastener requirements and your local building code, not by the nail box. Hot-dipped galvanized is the corrosion-resistant coating Paslode offers in its framing Fuel + Nail Packs. Paslode’s manual says its hot-dipped galvanized nails are not for use in all-weather wood foundations.

Which Paslode framers take this fuel, and the pre-2010 adaptor problem

Paslode’s product bulletin on the discontinuation of its red framing fuel adaptor lists which cordless 30° framers need an adaptor to use the current orange framing fuel:

Paslode itemModelAdaptor required
900420IMCTYes
902200CF325Yes
902600CF325LiNo
905600CF325XPNo
906300CFN325XPNo

The current Cordless XPro 30° Framing Nailer (CF325XPRO24, item 906800) came after that bulletin and takes the 816008 cell directly. If you own a CF325Li, CF325XP, CFN325XP or XPro, the orange cell and every 30° Fuel + Nail Pack on this page drop straight in.

If you own an IMCT (900420) or the original CF325 (902200), Paslode no longer makes the red adaptor those tools need to accept the orange cell. The old tall red framing fuel, item 816000, is also discontinued. Paslode’s technical service line is (800) 222-6990. That is the source for what Paslode currently supports for these tools.

Third-party “metering valves” sold as fitting the 900420 are not Paslode parts. Paslode’s documentation does not list them for its tools, and its manual says the warranty is void on any tool used with fuel not meeting Paslode specification. Before a pre-2010 framer owner spends money on cases of fuel, that is the risk to weigh. A newer framer that takes the 816008 directly removes it.

Paslode fuel and packs that won’t work in a framing nailer

Paslode sells several cells and packs that sit next to framing fuel on the shelf and are easy to grab by mistake.

The nails that go in a Paslode framer are 30° RounDrive nails on paper tape. Paslode’s manuals say nails that don’t meet Paslode standards can damage the tool and void the warranty. The tool warranty is 1-year full and 5-year extended limited, per Paslode’s catalog. A framer still under that coverage has a concrete reason to keep to Paslode nails.

Cold, heat, altitude and storage limits for framing fuel

Temperature limits apply to the tool, fuel cell and battery alike, and Paslode’s XPro operating manual gives the numbers. The manual also says the tool must be operated only in a well-ventilated environment because it exhausts carbon monoxide, and must not be used in a combustible environment or near flammable chemicals, adhesives, gasoline or solvents.

These limits apply equally to the loose 816008 cell and to the cells in Fuel + Nail Packs. No pack on this page extends any of them.

FAQ

Can I use the yellow Paslode 816007 fuel cell in my framing nailer?

Paslode’s compatible-tools list for the 816007 names only finish and brad nailers. Paslode sells the 816007 as its Cordless Finish Fuel Cell, made for its finish and brad nailers. Paslode cordless framers take the tall orange 816008 Cordless Framing Fuel Cell or the cells packed in its framing Fuel + Nail Packs.

Will a Fuel + Nail Pack work in my older Paslode CF325 or IMCT?

Paslode’s adaptor bulletin lists the IMCT (item 900420) and the original CF325 (item 902200) as needing an adaptor to use the current orange framing fuel, and that red adaptor has been discontinued. The CF325Li, CF325XP, CFN325XP and current XPro take the orange cell directly. For what Paslode currently supports on the two older tools, Paslode’s technical service line is (800) 222-6990.

Does the fuel cell in a pack last longer than the nails?

Paslode says its Fuel + Nail Packs include the exact number of fuel cells needed to fire all the nails in the pack, and rates the standalone 816008 cell at up to 1,200 framing nails. When you drive all the nails, it’s time for more fuel. Cold below 14°F, or a cell past its 27-month shelf life, can cut that short.